Article Categories

How Do I Configure My Canon MX700 Printer Wirelessly

in Computers / Computer Accessories by Sophia Taylor on 06/05/2017

The Canon MX700 all-in-one printer doesn‘t have the inbuilt wireless printing capabilities, but you can still connect your multi-function printer to the print server wirelessly to get the same outcomes. When you configure the wireless print server, it is necessary to install both the server and the printer driver on your system and set up the print server for the Wi-Fi network you‘re going to use. The following guide helps to set up your Canon MX700 printer on the wireless network so that you can print from any PCs using the same connection.

Note: - For any query resolution, you can seek the technical support for Canon printers and solve your all doubts within the shortest time.

Phase #1: Install the Canon MX700 Driver

Step 1 - First and foremost, insert the MX700 driver installation disk into the disk drive of your computer. It will process to install the software.

Step 2 - Click the ‘Easy Install‘ option, and then the ‘Install‘ button.  
On the next window, click to choose the ‘Yes‘ option agree to the licensing settlement.

Step 3 - Click the ‘Use the printer through USB‘ option, followed by the ‘Next‘ button. Connect your MX700 printer to the PC using a USB cable.

Step 4 – Double-click the ‘Next‘ button. Click the ‘Agree‘ or ‘Don‘t Agree‘ option on whether you wish to join the PIXMA extended survey application, and then click the ‘Exit‘ button.

However, if you encounter any issues in installing the MX700 driver, the Canon printer technical support is available here to offer the instant solution.

Phase #2: Configure the Wireless Print Server

Step 1 – Now, you need to take out the MX700 printer installation disc, and insert the wireless print server‘s installation disk into the computer‘s disc drive. It will continue to install the program.

Step 2 – Click on the button to run the installation process. It may be the ‘Install Now‘ or ‘Run‘ button.

Step 3 – Connect your printer to the print server using a USB cable. Click the ‘Next‘ button if necessary by the installation wizard program.

Step 4 – Connect your wireless printer to the print server using an Ethernet cable. Click the ‘Next‘ button if necessary by the installation wizard.

Step 5 – Click on the option to get an IP address automatically, and then click the ‘Next‘ button if necessary by the installation software.

Step 6 – Double-click the Wi-Fi network, which is used by the wireless print server, to select it from the list of existing networks.

Step 7 – Input the Wi-Fi network key. You may require choosing the wireless security type also, relying on the brand of your print server.

Step 8 - Remove the Ethernet cable, and then reboot the wireless print server by disconnecting and re-connecting it.

Phase #3: Install the Wireless Print Server Driver

Step 1 - When the print server has been configured, you no need to install the driver for Print Server. If the program doesn‘t automatically continue with the driver installation process, click on the button to keep on.

Step 2 – Choose your printer that is connected to the wireless print server from the list of available printers, and then click the ‘Next‘ button if required. After copying the driver, you may be prompted to print the test page. If not, click the ‘Finish‘ button.

However, if you‘re unable to setup your Canon MX700 all-in-one printer for wireless printing by following these steps, one of the last and best option is that contact the technical experts available at the Canon printer technical support number and obtain immediate solutions and stepwise process to configure your printer appropriately.

About The Author

Sophia Taylor began writing professionally in 2011 and has experience in technical writing, including hardware, software, and Internet technology articles.

No of Views : 238