Stainless Steel Pipe Fittings are broadly manufactured as an alloy of chromium and steel that form a strong and durable metal. The chromium creates the steel stainless and it is used primarily for the steel to be corrosion resistant. These characteristics of pipes and fittings require less maintenance and stand for the longest time. These are fairly lightweight and highly durable. Steel pipes are long, hollow tubes and these are used mainly to convey products from one location to another.
Uses of Stainless Steel Pipe Fittings
Stainless steel pipe fittings are extremely helpful for indoor and outdoor applications. These are very easy to clean and need less maintenance. Stainless steel is recognized for its hardcore and robust quality and is easily recyclable in various industries which make stainless steel pipes and fittings a good choice for many piping requirements. There are some of the most common uses of stainless steel pipes and fittings:
- Homes and buildings: supply and exhaust piping, water pipes and curtain rods.
- Transporting materials such as hot water, chemicals, oil, gas, and sulfur in various industries.
- Automotive industry: air and water flow systems, and piping systems.
- Sewerage systems, industrial water lines, and water mains.
- Heating, ventilating and air-conditioning equipment.
- Construction industries: structural applications and scaffolding.
Various methods involved in seamless steel pipe manufacturing
Seamless steel pipe manufacturing is creating into a pipe by stretching the hot steel billet out into a seamless pipe or forcing the edges of flat steel strip together and sealing them with a weld. There are following various methods of a seamless steel pipe supplier manufacturing process:
Normally, the Seamless Steel Pipes are made from the solid round steel ‘billet’ that is heated as well as pushed on the form of the steel and it is shaped in the hollow tube. These billets would be procured in the form of varied shapes and sizes in an absolute manner. The stainless steel seamless pipe does not have any kind of joints or welding and it is specially manufactured from the solid round billets. Pies would be mainly finished in the appropriate dimension with the wall thickness specifications for the sizes in the 1/8 inch to the 26 inches. It is especially Applicable for High-pressure applications like Oil & Gas Exploration, Industries & Refineries, Oil & Gas Transportation along with any number of other aspects.
Mandrel Mill Process
Mandrel Mill Process is used a solid round steel billet. The billet is charged into a rotary hearth furnace. After the billet is discharged from the rotary hearth furnace, a small hole is punched into its end. This indentation acts as a starting point to aid in the rotary piercing.
Mannerism Plug Mill Process
Mannerism Plug Mill Process is somewhat similar to Mandrel Mill Process with a major difference in rolling plug mill in place of a mandrel mill. a pair of conical shaped rolls – one arranged above the other – operates in the opposite direction to the material flow.
Extrusion Process
Extrusion is a metal forming process in which a work piece usually a round billet is forced to flow through a die of a smaller cross-sectional area, thus forming the work to the new cross-section.
Comments are closed.